MILLER MULTIMATIC 220 AC/DC WELDER SPECTRUM 375 PLASMA CUTTER (907757, 907529)
Take on more projects with one machine that has MIG, DC stick, and AC/DC TIG. • MIG: 24 ga.–3/8 in. steel 18 ga.–3/8 in. aluminum • DC Stick: 16 ga.–3/8 in. steel • AC/DC TIG: 24 ga.–1/4 in. steel and aluminumThe Multimatic 220 AC/DC comes equipped with all accessories to weld any process, unlike other machines where you need to purchase additional accessories.With Miller’s innovative QuickTech technology, setup and changing processes is even easier. • Automatically determines the polarity. Work is always connected to the bottom right receptacle. MIG gun and TIG torch can stay connected at the same time. • Automatically switches to the right process. Just hit the trigger or the foot control and the machine automatically changes, eliminating the need to manually change processes. • Automatically recalls the settings from the last process used.
Auto-Set Elite fast and easy predefined settings for multiple materials and processes to help you get welding quickly. • Available for all processes (MIG, stick, AC TIG, DC TIG) with the ability to fine-tune your settings. • Set weld parameters by selecting: MIG – wire diameter and material thickness Stick – electrode type, diameter and material thickness AC/DC TIG – tungsten diameter and material thicknessPro-Set (TIG and stick manual modes) Pro-set eliminates the guesswork when setting weld parameters. Simply adjust control until Pro-Set appears on the display and the number turns blue. • AC Balance (AC TIG)—controls the cleaning action (Pro-Set 75%) • AC Frequency (AC TIG)—controls the width of the arc cone (Pro-Set 120 Hz) • Pulse (DC TIG)—helps focus the arc for increased stability, penetration and travel speed (Pro-Set 100 Hz) • DIG (Stick)—lets you tailor arc characteristics for a wide range of applications (Pro-Set 30% 7018 electrodes)Robust, angled wire drive with Quick Select drive roll for easily changing one wire type/diameter to another. Quick Select drive roll offers three grooves; two for different size solid wires and a third for flux-cored wire.
Two shielding gas connections so both gases can be left connected to the machine; no switching needed. One connection for MIG gas and one for TIG gas.
Easy-to-understand interface with 3.5-inch color LCD display and intuitive connection setup images.
Weighing only 56 pounds, the Multimatic 220 AC/DC can go where the work is, plus the added convenience of one machine versus two or more.
Operates on 120-volt or 240-volt power letting you work virtually anywhere. Multi-voltage plug (MVP) easily connects to common 120-volt or 240-volt power outlets (no tools required to change). Choose the plug that fits the receptacle and connect it to the power cord.
14-pin controlled operator alternatives The standard 14-pin connector on your Multimatic 220 AC/DC lets you choose your control for a customized experience, whether it’s a foot control, fingertip control, or wireless foot control.
Wide range of TIG adjustability. • AC Balance – adjustable from 60–80% • AC Frequency – adjustable from 60–150 Hz • DC Pulse – adjustable from Off–150 pulses per second (PPS) • TIG Post-Flow – adjustable from Auto–25 seconds (accessible through service menu screen 12) • Lift-Arc and high-frequency starts • Tungsten size selection
Multimatic 220 Comes complete with: • Power source (907757) • 6.5 ft. (2 m) power cord with MVP plugs for 120 V and 240 V • 10 ft. (3 m) MDX 100 MIG gun and cable assembly (Accepts Miller MDX Consumables) • 13 ft. (4 m) cable electrode holder and 25 mm Dinse-style connector • 12.5 ft. (3.8 m) Weldcraft A-150 (WP-17) TIG torch with 25 mm Dinse-style connector • RFCS-14 HD foot control with 20 ft. (6 m) cord • 10 ft. (3 m) work cable with clamp and 25 mm Dinse-style connector • Two flow gauge regulators and gas hoses for argon and AR/CO2 mix • Hobart spool of .030 in. (0.8 mm) solid wire • Two contact tips for .030 in. (0.8 mm) wire • Quick Select™ drive roll for .024 in. (0.6 mm) or .030/.035 in. (0.8/0.9 mm) solid wire, and .030/.035 in. (0.8/0.9 mm) flux-cored wire • AK2C TIG torch accessory kit • Material thickness gauge (229895) • Hook-and-loop cord wraps
Spectrum 375 comes with • Spectrum 375 X-treme power source • 12 ft XT30 hand torch • Heavy-duty work clamp with 12 ft flexible cable • 10 ft power cord with MVP plugs (120V, 240V) • X-Case • Consumables box with 2 electrodes, 2 tips, deflector, and air fitting
More Information
Brand
Miller
SKU
IMIL20230002
MPN
MIL907757-907529
Mfgs MPN
907757
UPC
715959669276
Prop65
Yes
Process
Flux Cored (FCAW), MIG, Stick, TIG
Phase
Single Phase
Manufacturer’s Warranty
3 Years
Polarity
AC/DC
Skill Level
Beginner, Weekend Warrior, Career Welder
Discontinued Product
No
