DI water purification system for laboratory/ mechanical/ QC, digital display the resistivity or conductivity, real time monitoring the operation, optional single or double stage RO module.
Specification
Model
Moresearch310s/ 320s/ 330s
Moresearch310d/ 320d/ 330d
Process
Single pass RO system
Double pass RO system
Output of pure water
≥10L/H
≥10L/H
Output of ultrapure water
≥ 1-1.5L/min
≥ 1-1.5L/min
Resistivity at 25℃
10-16 MΩ.cm
10-16 MΩ.cm
Conductivity at 25℃
≤10μs/cm
≤5μs/cm
TOC
< 20ppb
< 20ppb
Absorbance (254nm,1cm optical distance)
≤ 0.001
≤ 0.001
Reactive Silica (SiO2)
< 0.01ppm
< 0.01ppm
Heavy metal
< 0.01ppm
< 0.01ppm
Electrical requirements
220V (230V, 240V) 50Hz
Power
≥100W
≥150W
Dimension (L/W/H)
340*550*530mm
340*550*530mm
Weight
≥35KG
≥40KG
Tank capacity
30L
Note: The model end with 's' has single stage RO module, suitable for feed water inlet TDS<200PPM. Model end with 'd' have double stage RO module, suitable for feed water inlet 200ppm
Product FeaturesPower on self test, water shortage protection alarm, power-off protection.Built-in RO membrane fouling prevention program, auto flushing when open and manual RO membrane cleaning button.Built-in automatic cycle timing of ultra pure water, ultra pure water conservation.Water resistance/conductivity on-line monitoring, display the running state and parameters.Pure water tank with cone type structure, a discharge valve at the bottom, easy to clean and disinfect exhausted. Water level auto detection.
Lab Test and Corresponding Water Type List
Test Name
Type III Water
Type II Water
Type I Water
Lab glassware washing
√
Hydroponics
√
Sterilizer use water
√
Gas generator use water
√
√
Conventional test
√
Reagents/ drugs preparation, dilution
√
Feed water for ultrapure water
√
IC
√
LC/LC-MS
√
HPLC
√
AAS
√
ICP/ICP-MS
√
GC/GC-MS
√
Trace analysis
√
TOC analysis
√
Organic analysis
√
Inorganic analysis
√
Environmental analytical test
√
Microelectronics parts cleaning
√
Precision instrument use water
√
Analytical reagent/ drugs preparation, dilution
√
Mass spectrometry
√
PCR application/analysis
√
DNA/RNA research
√
Proteomics research
√
Plant and animal cell culture
√
Toxicity analysis
√
Microbiology experiment
√
Immunological experiment
√
Biochemistry experiment
√
Serum test
√
IVF
√
Main Consumable List (A water purification system is equipped with a set of consumables. If you want to buy some of the following consumables, contact us now.)
No.
Name
Specification
Lifespan
1
PP filter
1st stage, 10”/20” (5μm)
3-6 months
2
Activated Carbon filter
2nd stage, 10”/20”
6-12 months
3
Softener filter
3rd stage, 10”/20”
6-12 months
4
Precision filter
4th stage, 10”/20” (1μm)
10-12 months
5
RO membrane
75g/300g
1-2 years
6
Ultra purification resin column
1 year
7
Micro filter
0.22μm
1 year
8
UV lamp
185/254nm
8000 hours
9
Pure water tank
30L, 80L, 120L
Tips: ConductivityConductivity is generally measured using a conductivity meter. Usually this indicator indicates the purity of water. The conversion method of conductivity is the inverse of resistivity. Conductivity, as its name implies, refers to the electrical conductivity of a substance. The larger the conductivity, the stronger the electrical conductivity. A smaller conductivity indicates a weaker conductivity. If the conductivity is larger, it means that there are more conductive ions in the water. That is, the more impurities there are in the water. Generally, the smaller the conductivity of the raw water in the purification water system the better. The water treated by ultra-pure water system is pure water, and its conductivity is generally lower than 10us.
