30kW portable industrial diesel fan heater works at single phase 110 volt / 60Hz or 220 volt / 50Hz AC power supply, with strong and long lasting construction, cut-off protection, if no fuel, heater will cut off the power. It is suitable for heating warehouse, factories, and workshops.
Parameter List
Model
ATO-ZBK100
Power Supply
Single phase AC 110V/60Hz, 220V/50Hz (Other voltages can be customized)
Power
30kW
Fuel
Diesel, Kerosene (Note that our heater using diesel and electricity for power at the same time)
Fuel Tank
38L
Fuel Consumption
2.8L/h
Heating Area
600m3
Ignition Type
Continuous spark ignition
Thermostat Control
Yes
Waterproof Class
IPX4
Work Temperature
5℃-45℃
Certification
CE, RoHS
Warranty
12 months
Product Size
830*445*460mm
Net Weight
24kg
Fan Heater Details
Spare Parts
Input Power Cable Selection
7 Tips for Using a Diesel Fan Heater
Use only diesel or kerosene specified by the industrial heater.
All the flame indicators are off, and the fuel can be added only after the fuel heater is cooled down.
When refueling, check whether there are leaks at the connection between the oil pipe and the oil pipe. Before the fan heater runs, any leaks must be repaired.
All fuel should be stored at least 1 meter away from heaters, flamethrowers, welding equipment and similar ignition sources.
Fuel storage should be limited to areas that do not allow fuel to penetrate or are not ignited in low-lying areas.
Do not use diesel heaters where gasoline, paint thinners, or other highly flammable gases are present. When using the heater, use it in accordance with the instructions.
When using fan heaters near oilcloths, canvas, and similar materials, the heaters should be placed at a safe distance from these materials. The recommended minimum safety distance is 500cm.
