Magnetic drive centrifugal pump adaptable to IEC standard motor. This type of pump is suitable forchemical industry and metal industry.
Features:
ETFE (carbon-fiber reinforced) wetted-end material.
Flow rates up to 830 L/min and discharge head of 34m.
Able to handle many types of chemical and temperature up to 90 ℃.
Available in flange connections.
Specification:
Model
353PW-F
Specific Gravity
1.2
Frequency
50Hz, 60Hz
Pump performance at specific point
50Hz
24-150
60Hz
32-120
Motor Output
3 HP (2.2 kW)
Flange Size
32 mm (outlet); 32 mm (inlet)
Casing Material
ETFE
Shaft Material
ceramic
Bearing Material
carbon
O-ring Material
FKM
Interface Mode
thread, flange
Structure:
Dimension (Unit: mm)
Model
W
H
L
a
b
c
d
e
f
352PW-F
160
242
505.5
222.5
132
155
130
120
78
Tips: How to Prime a Magnetic Drive Pump?
Ensure the magnetic drive pump is turned off and disconnected from the power source.
Open the suction valve on the inlet side of the pump.
Pour liquid into the inlet until the pump is filled.
Close the suction valve.
Turn on the pump and let it run for a few seconds to ensure that it is working properly.
It is important to never run a magnetic drive pump dry as this can cause damage to the pump. Always ensure that the pump is primed with the appropriate fluid before turning it on.
